Pressure Wash Auckland – How to Get Rid of Dirt, Moss and Algae From Your Driveway

Pressure washing or water blasting uses a high-pressure stream of water to clean surfaces. It can be used on concrete driveways, patios, pavers, decks and some building exteriors.

Spring is the ideal time to schedule a professional pressure wash auckland for your property. It will banish winter buildup and prep your home for a fresh coat of paint.


Whether your driveway is concrete, stone, brick or tarmac it gets dirty quickly and requires regular cleaning. It takes hours to clean a large area with a broom and hose pipe, but with a Pressure wash auckland it is fast and effective.

Pressure washing is the process of using high water jets to clean exterior surfaces such as paths, patios, tiled outdoor areas and building exteriors. It is also referred to as “water blasting”, and is the most efficient way to remove dirt, grime, mold, loose paint and debris from these exterior surfaces.

The best time to pressure wash is in the spring, when the winter buildup of dirt and grime has finished and before the summer rains begin. This also gives the exterior of your home a fresh clean and prepares it for any exterior painting that you might be planning. The heat of the water also helps to kill any weeds and moss in your garden, making them easier to pull up.


Due to New Zealand’s damp climate patios, paths and terrace areas become covered with moss, mould and algae. Over time this can make them unsafe and unappealing. A thorough clean with a specialised chemical treatment can remove these hazards, leaving you with clean and safe surfaces.

When arranging a pressure washing service, it’s important to clear out all debris from the area to be cleaned. This includes sweeping away any large objects that could become projectiles when sprayed and covering plants, outdoor lights or sound systems with tarps to protect them from damage. You should also close any windows and doors that may be in the direct line of spray.

The garden specialist will then set up the equipment to begin cleaning your surfaces. The machine ejects a powerful jet of water that can dislodge grime, dirt, stains and even loose paint from concrete and hard surfaces like paving and patios. The process can be used on a variety of surfaces, but certain types of materials like older bricks and exterior cladding are sensitive to high-pressure and might require a gentler approach such as soft washing.


When dirt, mud, oil stains and other unsightly substances build up on paths around your property, they can ruin the look of your entire building. Pressure washing (or water blasting) utilises high-pressure cleaning equipment to remove these substances, leaving your exterior surfaces clean and revitalised. We can also apply a chemical treatment to prevent re-growth of moss, mildew and algae.

Spring is the ideal time to schedule a professional residential or commercial pressure washing service. This process banishes winter grime and dirt buildup, ensuring that your property is ready for summer activities. It is also a good time to get your gutters cleaned to ensure that rainwater flows properly through your property, avoiding potential wall damage.

Not all surfaces can be pressure washed, however, as the use of high-pressure water can cause damage to certain types of materials like wood and older bricks. In these cases, a more gentle approach like soft pressure washing (using lower water pressure and specialized detergents) might be more appropriate.


A clean deck makes a great place to entertain and relax. Over time, however, a build-up of grime can make a deck slippery or look grey or faded due to algae or other microbes. A pressure wash using a wood cleaning solution can effectively break down these biofilms and restore the appearance of the timber.

If you have a deck that’s particularly clotted with stubborn organic materials or dark stains, then it may pay to give the area a scrub down beforehand using a stiff brush. This can help to prevent the boards from splitting once they’ve been exposed to the high-pressure spray from a power washer.

Always test your water blaster settings on a small patch of decking that’s out of sight before starting the job. You may need to adjust the fan degree or distance of the nozzle depending on your results. It’s also a good idea to move the nozzle in a sweeping motion to ensure even coverage and avoid over-strengthening any patches of decking.